Anchors

AMG Preset anchors for structures and poles are furnished as a complete assembly

AMG Preset anchors for structures and poles are furnished as a complete assembly, complete with a plywood template to assist in the setting of the anchor and guaranteeing the Bolt Circle Diameter (BCD) will not vary.

Preset anchor options include a square headed levelling stud to allow for adjustment after installation of the anchor and are designated by the letter “S” i.e. DGR-1S or DGR-2S, or A325 galvanized hex bolts.

The four Hi-Tensile bolts or studs, four round washers and anchor cage are hot dipped galvanized to ASTM-A 153. The anchors are available with 20mm(3/4″), 25mm(1″), 32mm(1-1/4″) or 38mm(1-1/2″) diameter bolts or studs.

Below is our standard size chart, and approvals by governing body.  Outside of those sizes, AMG can custom fabricate to any BCD, Square centre to centre dimension, bolt diameter and length or depth.

Anchor Structure Types

Besides the list below, AMG produces anchors for many different structures, with anchors/bolts, steel templates, spiral rebar wraps, bearing plates.

• Highmast anchors
• Structure anchors, cantilever, tri-chord, VMS, CMS
• Guiderail and channel anchors
• LRT Anchors
• Transit anchors
• Rail structure anchors
• Rail bridge anchors
• Rebar anchor & footing design
• I beam type barrier anchors OPSD 2216.010
• Transpo breakaway systems – frangible base anchors
• Barriers and Railings Steel Beam Guide Rail and Channel OPSD3419.100
• Hardware of all type for barriers, railings, Guide & Guard rail
• DYWIDAG Anchor systems